|
AMC Model AGTN-2000-70DD is a Broad
Band Variable Attenuator/Modulator,
Controlled by 10 Bit Positive True Binary Logic.
Specifications:
Frequency Range |
10 MHz - 2.0 GHz Minimum |
|
Insertion Loss |
2.5 dB Maximum |
Attenuation Flatness
(± dB Maximum) |
0 - 30 dB ±0.5 dB Maximum
30 - 50 dB ±1.5 dB Maximum
50 - 70 dB ±2.5 dB Maximum |
|
Attenuation Accuracy |
0 - 10 dB ±2.0 dB Maximum
10 - 20 dB ±1.0 dB Maximum
20 - 50 dB ±1.5 dB Maximum
50 - 60 dB ±2.0 dB Maximum |
|
Switching Time |
On: 25 usec
Off: 10 usec |
|
VSWR |
2.0:1 Maximum, 1.75 Typical
(@ 0 dB Attenuation) |
|
RF Power Ratings-Operating |
+10 dBm CW Maximum
+20 dBm Typical |
|
RF Power Ratings-Survival |
+30 dBm CW Maximum |
|
Control |
10 Bit True Binary Logic |
|
Power Supply |
+15 VDC @ 250 mA Maximum
- 15 VDC @ 50 mA Maximum |
|
Connectors |
RF Input/Output: SMA Female
Power and Controls: 15 Pin Micro-D Subminiature (Male)
Mating Connector Furnished |
|
Size |
2.00" X 1.81" X 0.88" |
Available Options:
|
A01 |
J1 SMA Male, J2 SMA Female |
|
A02 |
Two SMA Male RF Connectors |
|
A03 |
8 Bit Binary Logic |
|
A04 |
9 Bit Binary Logic |
|
A05 |
11 Bit Binary Logic |
|
A06 |
12 Bit Binary Logic |
|
A07 |
Extended Bandwidth, Slow Speed and 60 dB Attenuation Range
With Digital Control. Refer to Data Sheet
AGT-2018-60DD-100 (Slim Line).
For Analog Voltage Controlled Unit With Solder Pins Refer
to AGT-2018-60D-100 (Slim Line).
(Specify Frequency)
218: 2 - 18 GHz
219: 2 - 19 GHz
200M18: 200 MHz - 18 GHz
300M18: 300 MHz - 18 GHz
10M18: 10 MHz to 18 GHz |
|
A08 |
Analog Controlled Unit-10 dB/Volt Pin 2 is Used As Control
(Other Control Voltages Available). For Solder Pin
Units Refer to
AGT-2000-70DD. |
|
A09 |
High Speed Unit ≤1 usec, Digital Controlled, Extended
Bandwidth and 60 dB Attenuation Range. Refer to Data
Sheet
AGTN-2018-60DD-100 (Slim Line). For Analog
Voltage Controlled Units with Solder Pins Refer to
AGTN-2018-60D-100 (Slim Line).
(Frequency Range Options)
218: 2 - 18 GHz
219: 2 - 19 GHz
300M18: 300 MHz - 18 GHz
200M18: 200 MHz - 18 GHz |
|
A10 |
Mounting Surface Unpainted |
|
SCS |
Special Customer Specifications |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-55 ºC to +125
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B Cond. B |
| Shock: |
MIL-STD-202F,
Method 213B Cond. B |
| Vibration: |
MIL-STD-202F,
Method 204D Cond. B |
| Altitude: |
MIL-STD-202F,
Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D Cond. A |
|
Outline Drawing:
Click here to see the Outline Drawing for
AGT-2000-70DD
Product Feature:
Click here to see the Product Feature for
AGT-2000-70DD
Test Report:
Click here to see the Test Report for
AGT-2000-70DD
Press Release:
Click here to see our latest Press Release
on
AGT-2000-70DD
|
