|
SP2T Pin Diode Switch With Independent
Control and Solder Pins
Specifications:
Frequency Range |
0.3 - 20 GHz |
|
Insertion Loss |
Reflective: 3.0 dB
Absorptive: 3.5 dB |
|
Isolation |
60 dB Minimum |
|
VSWR |
Reflective In/Out: 2.2:1
Absorptive In/Out: 2.2:1
Absorptive Out/Off: 2.2:1 |
|
Speed |
Rise: 10 ns Typical, 15 ns Maximum
Fall: 10 ns Typical, 15 ns Maximum
Delay On: 75 ns Typical, 100 ns Maximum
Delay Off: 75 ns Typical, 100 ns Maximum |
|
Power Supply |
+ 5V @ 50 mA Maximum
-15V @ 30 mA Maximum (Reflective)
100 mA Maximum
(Absorptive/Non-Reflective) |
|
RF Power Rating |
+27 dBm CW Maximum |
|
Control |
TTL Logic "0"=On J3-J1, "1"=On J3-J2
(Single Control)
TTL Logic "0"=On, "1"=Off (Independent Control) |
Available Options:
Independent
Control With Solder Pin Standard
|
IND-SP |
Independent Control With Solder Pin |
|
10M18 |
10 MHz to 18 GHz (Insertion Loss Increases
by 1.5 dB at 10 MHz and 0.5 dB at 18 GHz) |
|
100M18 |
100 MHz to 18 GHz (Insertion Loss Increases
by 1.5 dB at 100 MHz and 0.5 dB at 18 GHz) |
|
118 |
1 - 18 GHz (No Change in Insertion Loss) |
|
218 |
2 - 18 GHz (No Change in Insertion Loss) |
|
412 |
4 - 12.4 GHz (No Change in Insertion Loss) |
|
618 |
6 - 18 GHz (No Change in Insertion Loss) |
|
1218 |
12 - 18 GHz (No Change in Insertion Loss) |
|
100M20 |
100 MHz - 20 GHz (Insertion Loss Increases by
1.5 dB at 100 MHz and 1.0 dB at 20 GHz) |
|
220 |
2 - 20 GHz (Insertion Loss Increases by 1.0 dB
at 20 GHz) |
|
1020 |
10 - 20 GHz (Insertion Loss Increases by
1.0 dB at 20 GHz) |
|
B01 |
-12V Power Supplies |
|
B02 |
- 5V Power Supplies |
|
B03 |
Reverse Logic "1" = On, "0" = Off |
|
B04 |
Driverless, Current Controlled |
|
B06 |
High Power - Specify CW Power, Peak Power,
Pulse Width, Duty Cycle, RF Frequency and Bandwidth
(Not Available With Option B02) |
|
B07 |
Custom Designed Product - Specify Initials of Customer |
|
B08 |
Low Video Transients - Specify Video Bandwidth |
|
B09 |
Low Insertion Loss Version |
|
B10 |
Higher Isolation Version |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-55 ºC to +85
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B Cond. B |
| Shock: |
MIL-STD-202F,
Method 213B Cond. B |
| Vibration: |
MIL-STD-202F,
Method 204D Cond. B |
| Altitude: |
MIL-STD-202F,
Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D Cond. A |
|
Outline Drawing:
Click here to see the Outline Drawing for
MSN-2DR/DT-025-IND-SP-COMSOL
Product Feature:
Click here to see the Product Feature for
MSN-2DR/DT-025-IND-SP-COMSOL
|
