|
AMC Model SAB-2DR/DT-'A' ('A' =
Specified Value of Attenuation) is a 0.5 to 18 GHz,
Reflective or Absorptive, Solid State Step Attenuator.
Specifications:
Frequency |
0.5 - 18 GHz |
|
Number of Bits |
1 |
|
Insertion Loss |
3.0 dB (Reflective), 3.5 dB (Non-Reflective) |
|
VSWR |
2.0:1 Maximum |
|
Switching Speed |
100 nS Maximum, 50 nS Typical |
|
Flatness |
±1.5 dB Maximum, ±1.0 dB Typical |
|
Power Handling Capability |
0.1 Watt |
|
Size |
1.3"(L) X 0.7"(W) X 0.4"(H) Maximum |
|
RF Connectors |
SMA Female (Removable) |
|
Impedance |
50 Ohms |
|
Power Supply |
+5V @ 100 mA
- 5V @ 80 mA |
Step Size (Specify)
('A' = Value of Attenuation) |
3 dB
20 dB (or any Combination of These)
8 dB
30 dB
10
dB
40 dB |
|
Weight |
Approximately 0.75 Ounces |
Available Options:
Single Control With Solder
Pin Standard
|
10M18 |
10 MHz to 18 GHz (Insertion Loss Increases
by 1.5 dB at 10 MHz and 0.5 dB at 18 GHz) |
|
100M18 |
100 MHz to 18 GHz (Insertion Loss Increases
by 1.5 dB at 100 MHz and 0.5 dB at 18 GHz) |
|
118 |
1 - 18 GHz (No Change in Insertion Loss) |
|
218 |
2 - 18 GHz (No Change in Insertion Loss) |
|
412 |
4 - 12.4 GHz (No Change in Insertion Loss) |
|
618 |
6 - 18 GHz (No Change in Insertion Loss) |
|
1218 |
12 - 18 GHz (No Change in Insertion Loss) |
|
100M20 |
100 MHz - 20 GHz (Insertion Loss Increases by
1.5 dB at 100 MHz and 1.0 dB at 20 GHz) |
|
220 |
2 - 20 GHz (Insertion Loss Increases by 1.0 dB
at 20 GHz) |
|
1020 |
10 - 20 GHz (Insertion Loss Increases by
1.0 dB at 20 GHz) |
|
B01 |
-12V Power Supplies |
|
B02 |
-15V Power Supplies |
|
B03 |
Reverse Logic "1" = On, "0" = Off |
|
B04 |
Driverless, Current Controlled |
|
B05 |
High Speed, Turnon/Turnoff 20 nS Maximum
when Applicable or Option HS |
|
B06 |
High Power - Specify CW Power, Peak Power,
Pulse Width, Duty Cycle,
RF Frequency and Bandwidth |
|
B07 |
Custom Designed Product - Specify Initials of Customer |
|
B08 |
Low Video Transients - Specify Video Bandwidth |
|
B09 |
Low Insertion Loss Version |
|
B10 |
Higher Isolation Version |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-55 ºC to +85
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B Cond. B |
| Shock: |
MIL-STD-202F,
Method 213B Cond. B |
| Vibration: |
MIL-STD-202F,
Method 204D Cond. B |
| Altitude: |
MIL-STD-202F,
Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D Cond. A |
|
Outline Drawing:
Click here to see the Outline Drawing for
SAB-2DR/DT-'A'
Product Feature:
Click here to see the Product Feature for
SAB-2DR/DT-'A'
Test Report:
Click here to see the Test Report for
SAB-2DR-10 Option
0518
Test Report:
Click here to see the Test Report for
SAB-2DR-20 Options
218, LVT
Test Report:
Click here to see the Test Report for
SAB-2DR-30 Option
0518
|
