|
AMC Model SW-2025-6D is a Reflective SP6T Switch Module with
Integral TTL Driver, Designed For High Reliability
Applications Such As
Shipboard Radars Where Switching Speed, Isolation and Spectral
Purity
Are of Extreme Importance.
Specifications:
Frequency Range |
2.0 - 2.5 GHz Minimum |
|
Insertion Loss |
1.5 dB Maximum |
|
Insertion Loss Balance |
0.4 dB Maximum |
Insertion Loss Variation Over
Temperature |
±0.1 dB Maximum Over Operating Temperature Range |
Insertion Loss Variation Over
Frequency |
±0.1 dB Maximum |
|
Isolation |
40 dB Minimum |
|
VSWR (On) |
1.4:1 Maximum |
|
RF Power |
+30 dBm CW Maximum |
|
Switching Time |
Rise (10% RF to 90% RF): 40 ns Maximum
Fall (90% RF to 10% RF): 40 ns Maximum
On (50% TTL to 90% RF): 400 ns Maximum
Off (50% TTL to 10% RF): 400 ns Maximum |
|
Settling Time |
On (90% To
Within ±0.25 dB Of Insertion
Loss): 0.7 us Maximum
Off (10% To
Minimum Isolation Requirement):
1.0 us Maximum |
|
Voltage Transients |
1 Vpp Maximum Across 50 Ohm Load |
|
Controls |
Standard TTL Compatible
6 Individual Controls
Logic "0" = Insertion Loss
Logic "1" = Isolation |
|
Harmonic Distortion Products |
65 dBc Minimum |
Spurious Signals/Spectral Purity
(AM/PM Sidebands In Operating Band
2 - 2.5GHz) |
100 dB Below The Output Signal Level |
Spurious Signals/Spectral Purity
(AM/PM Sidebands In Non Operating Band
(100 MHz - 2 GHz & 2.5 - 10 GHz) |
65 dB Below the Output Signal Level |
|
RF Leakage Radiative |
-90 dBm/Square foot,
1 Foot Distance Approximately |
|
RF Leakage Conductive |
-90 dBm On Supply and Control Lines |
|
Radiation Susceptibility |
≥ -76 dBm For RF Interference Field of
-20 dBm/Square Foot |
|
Conducted Susceptibility |
≥ -76 dBm For RF Interference Level of
-20 dBm On DC
Power Lines |
Conducted Susceptibility
(Intermodulation) |
≥ -85 dBm For -20 dBm RF Interference Level On DC Power
Lines |
|
Power Supply |
+ 5 VDC ±5% @ 120 mA Maximum
+15 VDC ±5% @ 40 mA Maximum
(Over Voltage Protected) |
|
Connectors |
RF Input/Output: SMA Female
Power: Solder Pin
Control: Solder Pin |
|
Size |
2" Diameter X 0.75" Thick |
Environmental Ratings:
| |
|
Temperature: |
0 ºC to +65
ºC Operating |
|
-55
ºC to +70 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103 Cond. B |
| Shock: |
MIL-S-901
Grade A, Class I or II |
| Vibration: |
MIL-S-167,
Type 1 Vibration, 0.1G Sinusoidal 25 Hz To 2000 Hz |
| MTBF: |
1 x 10^6
Hours, @ +50
ºC Operation |
|
Environmental Stress Screening
(ESS):
| |
|
Temperature Cycles: |
10 Cycles,
1/2 Hour Soak Minute, -55
ºC To
85
ºC |
| Temperature
Shock:: |
4 Cycles, -55
ºC To +85 ºC |
| Vibration: |
10 G @ 60 Hz
For 1 Minute, 3 Axis |
| Burn In
(Operating): |
MIL-STD-883
Method 1015.4 Test Cond. B
160 Hours @ 125
ºC
Junction Temperature
(105 ºC Ambient) |
|
ESS (Next Higher Assembly): |
Thermal: 5
Cycles, 5
ºC Per Minute, -55 ºC To +55 ºC
Random Vibration: 20 To 2000 Hz And 6 G RMs,
10 Minutes Per Axis At +55 ºC/-55 ºC |
|
Outline Drawing:
Click here to see the Outline Drawing for
SW-2025-6D
Product Feature:
Click here to see the Product Feature for
SW-2025-6D
Test Report:
Click here to see a Test Report on
SW-2025-6D
|
