|
The SW-2183-1AT is a Broadband, High
Speed, Low Loss SPST Unit with Off-Arm
Terminations and Integral TTL Compatible Driver. It is
Powered by +5V and -12 Volt
Supplies. It Features Rugged Integrated Circuit
Assemblies of Chip Pin Diodes on a
Microstrip Transmission Line and TTL Driver that is
Electrically as well as Mechanically
Integral for Smooth Pulse Modulation with no Overshoot or
Ringing.
Specifications:
Frequency Range |
0.3 - 18 GHz |
|
Isolation |
70 dB Minimum |
|
Insertion Loss |
3.5 dB Maximum |
|
VSWR (On and Off) |
2.0:1 Maximum |
|
Switching Speed |
Rise Time (10 - 90% RF): 10 ns Maximum
Fall Time (90 - 10% RF): 10 ns Maximum
On Time (50% Command to 90% RF):30 ns Maximum
Off Time (50% Command to 10% RF): 30 ns Maximum |
|
Power Handling Capability |
No Degradation: 500 mw CW or Peak
Survival Power: 1 W Avrage, 10 W Peak
(1 u-Second Maximum Pulse Width) |
|
Power Requirements |
+ 5V ±2%, 90 mA
-12V ±5%, 75 mA |
|
Control Characteristics |
Control Input - 1 Unit Load
Logic Sense: 0=Switch On, 1=Switch Off |
Available Options:
|
001 |
(2) SMA Male RF Connectors |
|
002 |
(1) Male, (1) Female SMA RF Connector Each |
|
003 |
Solder Type Control Terminal |
|
005 |
50 Ohm Control Impedance |
|
103 |
Integral Video Filters
(2 - 18 GHz Frequency Band) |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-65 ºC to +110
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B Cond. B |
| Shock: |
MIL-STD-202F,
Method 213B Cond. B |
| Vibration: |
MIL-STD-202F,
Method 204D Cond. B |
| Altitude: |
MIL-STD-202F,
Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D Cond. A |
|
Outline Drawing:
Click here to see the Outline Drawing for
SW-2183-1AT
Product Feature:
Click here to see the Product Feature for
SW-2183-1AT
|
