|
AMC Model SW-2184-1A-225 is a Reflective
Broad-Band Pulse Modulator/Switch with
Integral TTL Driver, And Built-In Input/Output Video Filter.
Designed for Wide Band,
High Speed and Low Distortion RF-Linked, Data Communications.
Specifications:
Frequency Range |
0.5 - 18 GHz Minimum |
|
Insertion Loss |
0.5 - 1 GHz: 1.2 dB Maximum
1.0 - 2 GHz: 1.2 dB Maximum
2.0 - 4 GHz: 1.5 dB Maximum
4.0 - 8 GHz: 2.0 dB Maximum
8.0 - 18 GHz: 2.8 dB Maximum |
|
Isolation |
0.5 - 1 GHz: 50 dB Minimum
1.0 - 2 GHz: 70 dB Minimum
2.0 - 8 GHz: 85 dB Minimum
8.0 - 18 GHz: 80 dB Minimum |
|
VSWR (On) |
0.5 - 4 GHz : 1.5:1 Maximum
4.0 - 8 GHz : 1.8:1 Maximum
8.0 - 18 GHz : 1.9:1 Maximum |
|
RF Power Ratings |
2W CW Maximum, 10W Peak (1 uS, PW) |
|
Switching Time |
Rise (10% RF to 90% RF): 10 ns Maximum
Fall (90% RF to 10% RF): 10 ns Maximum
On (50% TTL to 90% RF): 25 ns Maximum
Off (50% TTL to 10% RF): 25 ns Maximum |
|
In-Band Video Transients |
150 mV P-P Across 50 Ohm Impedance in
20 MHz Bandwidth |
|
Control |
TTL Compatible, Unity Load
Logic "0" Isolation
Logic "1" Insertion Loss |
|
Power Supply |
+ 5 VDC ±5% @ 110 mA Maximum
-12 VDC ±5% @ 40 mA Maximum |
|
Connectors |
RF Input/Output: SMA (Female)
Power: Solder Pin
Control: Solder Pin |
|
Size |
1.10" X 0.87" X 0.37" |
Available Options:
|
A01 |
50 Ohm Control Impedance |
|
A02 |
100 Ohm Control Impedance |
|
A03 |
Inverse Control Logic (Logic "1" Isolation) |
|
A04 |
Extended Frequency To 100 MHz |
|
A05 |
5 Watts CW Maximum |
|
A06 |
2 ns Rise/Fall Time |
|
A07 |
Single Ended ECL Driver
(10 ns On/Off Time) |
|
A09 |
Balanced ECL Driver (10 ns On/Off Time) |
|
A10 |
-15 Volt Power Supply |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-55 ºC to +85
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B Cond. B |
| Shock: |
MIL-STD-202F,
Method 213B Cond. B |
| Vibration: |
MIL-STD-202F,
Method 204D Cond. B |
| Altitude: |
MIL-STD-202F,
Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D Cond. A |
|
Outline Drawing:
Click here to see the Outline Drawing for
SW-2184-1A-225
Product Feature:
Click here to see the Product Feature for
SW-2184-1A-225
Revised Product Feature
(Added to the Website 06/22/07):
Click here to see the Revised Product Feature for
SW-2184-1A-225
Test Data (Option A10):
Click here to see Test Data on
SW-2184-1A-225-A10
|
