|
AMC Model SW-2560-7D is a
Reflective SP7T Switch Module
With
Integral
TTL Driver, Designed to Maintain Low Harmonic RF
Contents, Good Phase
and Amplitude Balance, and High Isolation. Applications
are for Highly
Sensitive Low-Noise
Radars and Missile Systems.
Specifications:
Frequency Range |
1.215 MHz - 1.400 GHz |
|
Insertion Loss |
1.5 dB Maximum |
Insertion Loss Match
Port to Port |
0.2 dB Maximum |
|
Isolation |
43 dB Minimum |
|
VSWR |
1.9:1 Maximum |
|
Switching Time: |
Delay
On (50% RRL To 90% RF): 1 uSec Maximum
Delay
Off (50% RRL To 90% RF): 1 uSec Maximum |
|
RF Power Ratings |
+27 dBm CW Maximum |
|
Harmonic Contents |
2nd Harmonic Intercept: +56 dBm Minimum
2nd Order Two-Tone Intercept: +50 dBm Minimum
@ 0 dBm Input RF Power
3rd Order Two-Tone Intercept: +40 dBm Minimum
@ 0 dBm Input RF Power |
|
RF Leakage (Conductive/Radiated) |
>70 dBc @ 2.56 GHz |
|
Control |
3 Bit Binary TTL Logic |
|
Power Supply |
+20 VDC @ 215 mA Maximum
- 20 VDC @ 35 mA Maximum |
|
Connectors |
RF Input/Output: SMA (Female)
Power and Controls: 15 Pin D Type Connector |
|
Size |
3.0" X 2.0" X 1.5" |
Available Options:
|
A01 |
SMA Male Connectors |
|
A02 |
7 Individual Controls |
|
A03 |
Differential TTL Line Receiver/Decoder
(RS-422-A) |
|
A04 |
Inverse Control Logic |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-55 ºC to +95
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B Cond. B |
| Shock: |
MIL-STD-202F,
Method 213B Cond. B |
| Vibration: |
MIL-STD-202F,
Method 204D Cond. B |
| Altitude: |
MIL-STD-202F,
Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D Cond. A |
|
Outline Drawing:
Click here to see the Outline Drawing for
SW-2560-7D
Product Feature:
Click here to see the Product Feature for
SW-2560-7D
Test Data:
Click here to see the Test Data for
SW-2560-7D
Acceptance Test Procedure
(ATP):
Click here to see the Acceptance Test
Procedure for
SW-2560-7D
Type Test Procedure:
Click here to see the Type Test Procedure
for
SW-2560-7D
Qualification Test Procedure (QTP):
Click here to see the Qualification Test
Procedure for
SW-2560-7D
Mean Time Between Failures
Calculation (MTBF) for Westinghouse
P/N's: PDS24433 (SW-2560-7D) and PDS24422 (Transfer RF Switch
Network):
Click here to see the MTBF Calculation for
SW-2560-7D and PDS24422
|
