|
AMC Model SW-4045-5DT is an Absorptive
SP5T Switch Module with
Integral TTL Driver, Designed For High Reliability
Applications Such As
Shipboard Radars Where Switching Speed, Isolation and Spectral
Purity
Are of Extreme Importance.
Specifications:
Frequency Range |
400 - 450 MHz Minimum |
|
Insertion Loss |
1.4 dB Maximum |
|
Insertion Loss Balance |
0.2 dB Maximum |
Insertion Loss Variation Over
Temperature |
±0.1 dB Maximum Over Operating Temperature Range |
Insertion Loss Variation Over
Frequency |
±0.1 dB Maximum |
|
Isolation |
90 dB Minimum |
|
VSWR (On/Off) |
1.3:1 Maximum |
|
RF Power |
+16 dBm CW Maximum |
|
Switching Time |
Rise (10% RF to 90% RF): 40 ns Maximum
Fall (90% RF to 10% RF): 40 ns Maximum
On (50% TTL to 90% RF): 300 ns Maximum
Off (50% TTL to 10% RF): 300 ns Maximum |
|
Settling Time |
On (90% To
Within ±0.25 dB Of Insertion
Loss): 0.7 us Maximum
Off (10% To
Minimum Isolation Requirement):
1.0 us Maximum |
|
Voltage Transients |
1 Vpp Maximum Across 50 Ohm Load |
|
Controls |
Standard TTL Compatible
5 Individual Controls
Logic "0" = Insertion Loss
Logic "1" = Isolation |
|
Harmonic Distortion Products |
50 dBc Minimum |
Spurious Signals/Spectral Purity
(AM/PM Sidebands In Operating Band) |
100 dB Below The Output Signal Level |
|
RF Leakage Radiative |
-90 dBm/Square foot,
1 Foot Distance Approximately |
|
RF Leakage Conductive |
-90 dBm On Supply and Control Lines |
|
Radiation Susceptibility |
≥ -76 dBm For RF Interference Field of
-20 dBm/Square Foot |
|
Conducted Susceptibility |
≥ -76 dBm For RF Interference Level of -20 dBm On DC Power
Lines |
Conducted Susceptibility
(Intermodulation) |
≥ -85 dBm For -20 dBm RF Interference Level On DC Power
Lines |
|
Power Supply |
+ 5 VDC ±5% @ 90 mA Maximum
+15 VDC ±5% @ 80 mA Maximum
(Over Voltage Protected) |
|
Connectors |
RF Input/Output: SMA Female
Power: Solder Pin
Control: Solder Pin |
|
Size |
2.69" X 1.69" X 0.68" |
Environmental Ratings:
| |
|
Temperature: |
0 ºC to +65
ºC Operating |
|
-55
ºC to +70 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103 Cond. B |
| Shock: |
MIL-S-901
Grade A, Class I or II |
| Vibration: |
MIL-S-167,
Type 1 Vibration, 0.1G Sinusoidal 25 Hz To 2000 Hz |
| MTBF:: |
1 x 10^6
Hours, @ +50
ºC Operation |
|
Environmental Stress Screening
(ESS):
| |
|
Temperature Cycles: |
10 Cycles,
1/2 Hour Soak Minute, -55
ºC To
85
ºC |
| Temperature
Shock:: |
4 Cycles, -55
ºC To +85 ºC |
| Vibration: |
10 G @ 60 Hz
For 1 Minute, 3 Axis |
| Burn In
(Operating): |
MIL-STD-883
Method 1015.4 Test Cond. B
160 Hours @ 125
ºC
Junction Temperature
(105 ºC Ambient) |
|
ESS (Next Higher Assembly): |
Thermal: 5
Cycles, 5
ºC Per Minute, -55 ºC To +55 ºC
Random Vibration: 20 To 2000 Hz And 6 G RMs,
10 Minutes Per Axis At +55 ºC/-55 ºC |
|
Outline Drawing:
Click here to see the Outline Drawing for
SW-4045-5DT
Product Feature:
Click here to see the Product Feature for
SW-4045-5DT
|
