|
SPST Solid State Switch
Specifications:
Frequency |
468 MHz,±50 MHz |
|
Insertion Loss |
2.5 dB Typical @ 468 MHz |
|
Isolation |
100 dB Minimum @ 468 MHz |
|
VSWR (On/Off) |
2.0:1 Maximum @ 468 MHz |
|
Speed |
Rise: 5 nsec Maximum, 3 nsec Typical
Fall: 5 nsec Maximum, 3 nsec Typical
Delay On: 15 nsec Maximum
Delay Off: 15 nsec Maximum |
|
Balance On/Off |
Within ±2 nsec |
|
Video Transients |
30 mV (P-P) Maximum
300 MHz Bandwidth |
|
RF Power |
+20 dBm Typical at 468 MHz |
|
Control |
ECL Control, Single Ended, 50 Ohm Load Input (130 Ohms to
5.2V Supplies and 82 Ohms to Ground)
High (-0.8V)=On
Low (-1.8V)=Off |
|
Power Supply |
+5V @ 100 mA Maximum
- 5V @ 100 mA Maximum |
|
Connectors |
RF Input/Output: Field Replaceable SMA (Female)
Power: Solder Pin
Control: SMC |
|
Size |
1.50"(L) X 1.50"(W) X 0.40"(H) |
|
Weight |
2.0 Oz Typical |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-55 ºC to +85
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B Cond. B |
| Shock: |
MIL-STD-202F,
Method 213B Cond. B |
| Vibration: |
MIL-STD-202F,
Method 204D Cond. B |
| Altitude: |
MIL-STD-202F,
Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D Cond. A |
|
Outline Drawing:
Click here to see the Outline Drawing for
SWM-6000-1DTU-ECL-GB
Product Feature:
Click here to see the Product Feature for
SWM-6000-1DTU-ECL-GB
Test Report:
Click here to see the Test
Report for
SWM-6000-1DTU-ECL-GB
|
