|
SP5T Pin Diode Switch
Specifications:
Frequency Range |
0.5 - 18 GHz |
|
Insertion Loss |
Reflective: 3.25 dB
Absorptive: 4.0 dB |
|
Isolation |
0.5 - 2 GHz: 60 dB
2 - 18 GHz: 70 dB |
|
VSWR |
Reflective In/Out: 2.0:1
Absorptive In/Out: 2.0:1
Absorptive Out/Off: 2.0:1 |
|
Speed |
Rise: 10 ns Typical, 15 ns Maximum
Fall: 10 ns Typical, 15 ns Maximum
Delay On: 75 ns Typical, 100 ns Maximum
Delay Off: 75 ns Typical, 100 ns Maximum |
|
Power Input |
(CW) +20 dBm (Standard), +10 dBm (High Speed) |
|
Survival Power |
1 Watt CW, 10 Watts Peak 1 usec |
|
Control |
TTL Logic "0"=On, "1"=Off |
|
Power Supply |
+5V@250 mA Maximum
-5V@75 mA Maximum (Reflective)
100 mA Maximum
(Absorptive/Non-Reflective) |
Available Options:
Independent
Control With Solder Pin Standard
|
DEC-SP |
3 Bit Decoder with Solder Pin |
|
10M18 |
10 MHz to 18 GHz (Insertion Loss Increases
by 1.5 dB at 10 MHz and 0.5 dB at 18 GHz) |
|
100M18 |
100 MHz to 18 GHz (Insertion Loss Increases
by 1.5 dB at 100 MHz and 0.5 dB at 18 GHz) |
|
118 |
1 - 18 GHz (No Change in Insertion Loss) |
|
218 |
2 - 18 GHz (No Change in Insertion Loss) |
|
412 |
4 - 12.4 GHz (No Change in Insertion Loss) |
|
618 |
6 - 18 GHz (No Change in Insertion Loss) |
|
1218 |
12 - 18 GHz (No Change in Insertion Loss) |
|
100M20 |
100 MHz - 20 GHz (Insertion Loss Increases by
1.5 dB at 100 MHz and 1.0 dB at 20 GHz) |
|
220 |
2 - 20 GHz (Insertion Loss Increases by 1.0 dB
at 20 GHz) |
|
1020 |
10 - 20 GHz (Insertion Loss Increases by
1.0 dB at 20 GHz) |
|
B01 |
-12V Power Supplies |
|
B02 |
-15V Power Supplies |
|
B03 |
Reverse Logic "1" = On, "0" = Off |
|
B04 |
Driverless, Current Controlled |
|
B05 |
High Speed, Turnon/Turnoff 25 nS Maximum
when Applicable |
|
B06 |
High Power - Specify CW Power, Peak Power,
Pulse Width, Duty Cycle, RF Frequency and Bandwidth |
|
B07 |
Custom Designed Product - Specify Initials of Customer |
|
B08 |
Low Video Transients - Specify Video Bandwidth |
|
B09 |
Low Insertion Loss Version |
|
B10 |
Higher Isolation Version |
|
B11 |
0.40" Thick Version |
|
B12 |
0.70" Thick Version |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-55 ºC to +85
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B Cond. B |
| Shock: |
MIL-STD-202F,
Method 213B Cond. B |
| Vibration: |
MIL-STD-202F,
Method 204D Cond. B |
| Altitude: |
MIL-STD-202F,
Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D Cond. A |
|
Outline Drawing:
Click here to see the Outline Drawing for
SWN-1182-5DR/DT-STANDARD
Product Feature:
Click here to see the Product Feature for
SWN-1182-5DR/DT-STANDARD
|
