|
AMC Model SWN-2183-1A is a Broadband,
High Speed, Low Loss SPST Switch
With an Integral Driver.
Specifications:
Frequency Range |
0.5 - 18.0 GHz |
|
Isolation |
0.5 - 1.0 GHz: 40 dB Minimum
1.0 - 2.0 GHz: 60 dB Minimum
2.0 - 18.0 GHz: 70 dB Minimum
|
|
Insertion Loss |
0.5 - 2.0 GHz: 1.0 dB Maximum
2.0 - 4.0 GHz: 1.1 dB Maximum
4.0 - 8.0 GHz: 1.4 dB Maximum
8.0 - 12.4 GHz: 1.8 dB Maximum
12.4 - 18.0 GHz: 2.3 dB Maximum
|
|
VSWR (On) |
0.5 - 4.0 GHz: 1.4:1 Maximum
4.0 - 8.0 GHz: 1.6:1 Maximum
8.0 - 18.0 GHz: 1.9:1 Maximum
|
|
Switching Speed |
Rise Time (10% to 90% RF): 10 nS
Fall Time (90% to 10% RF): 10 nS
TTL Delay for Turn-Off (50% TTL to 90% RF): 60 nS
TTL Delay for Turn-On (50% TTL to 10% RF): 60 nS |
|
Power Handling |
Average: 2 Watts
Peak 1 usec, Maximum, PW: 10 Watts |
|
Power Supply |
+5 VDC @ 100 mA
- 5 VDC @ 45 mA |
|
Control Impedance |
TTL Compatible, Two Load (A Load is 1.6 mA Sink Current
and 40 A Source Current) |
|
Control Logic |
Logic "0" (-0.3 to +0.7 Volt) for Switch Off
Logic "1" (+2.5 to +5.0 Volts) for Switch On |
|
Size |
1.00"(L) X 1.00"(W) X 0.50"(H) |
Available Options:
|
001 |
Two SMA Male RF Connectors |
|
002 |
One SMA Male and One SMA Female RF Connector |
|
003 |
SMC Control Connector (Solder Type is Standard) |
|
004 |
±15 Volt Power Supply Requirement
(±5 Volt is Standard) |
|
005 |
50 Ohm Control Impedance |
|
006 |
Cannon MultiPin MDM9SSP |
|
007 |
Inverted Logic |
|
008 |
Extended Frequency to 100 MHz |
|
010 |
50 ns, Maximum Switching Speed
(5 Watts CW, Maximum) |
|
012 |
2 ns, Maximum Switching Speed
(100 mw, cw Maximum) |
|
013 |
-12 VDC Power Supply Requirement
(+5V, -5V is Standard) |
|
103 |
Integral Video Filters (2-18 GHz Frequency Band) Insertion
Loss Increase of
0.75 dB Maximum |
|
HS |
High Speed Version - 20 nsec. Delay |
|
AT |
Off Arm Termination |
Environmental Ratings:
| Our standard
environmental ratings are as follows, for specific
requirements please contact us... |
|
Temperature: |
-65 ºC to +110
ºC Operating |
| -65
ºC to +125 ºC Non-Operating |
| Humidity: |
MIL-STD-202F,
Method 103B |
| Shock: |
MIL-STD-202F,
Method 213B |
| Vibration: |
MIL-STD-202F,
Method 204D |
| Altitude: |
MIL-STD-202F,
Method 105C |
|
Temperature Cycle: |
MIL-STD-202F,
Method 107D |
|
Outline Drawing:
Click here to see the Outline Drawing for
SWN-2183-1A
Product Feature:
Click here to see the Product Feature for
SWN-2183-1A
|
