SWN-4TDR-HILL is a 2.0 to 18.0 GHz Reflective, SP4T Pin Diode Switch with a
MIL-Spec RF and Multipin Connector

Specifications:

Frequency Range	2 - 18 GHz
Insertion Loss	2 - 11 GHz @ 2.5 dB 11 - 16 GHz @ 2.8 dB 16 - 18 GHz @ 3.1 dB
Insertion Loss Balance	The Insertion Loss Difference Between any Two of the Four RF Channels Does not Exceed 0.7 dB at any Given Frequency Within the Pass-Band of the Switch. The Insertion Difference Between J2-J5 and J4-J5 or J1-J5 and J3-J5 when either Pair of Channels are in the Insertion Loss State and when One of the Two Arms are Terminated into 50 Ohms, Does not Exceed 2.2 dB at any Given Frequency Within the Pass-Band of the Switch.
Isolation	45 dB Minimum
VSWR	2.2:1 Maximum on any One Arm in the Insertion Loss State and 4.4:1 on Two Arms in the Insertion Loss State (With These Terminated into 50 Ohms)
Speed	Delay On: 200 nS Maximum Delay Off: 200 nS Maximum
Power Input	(CW) +20 dBm
Survival Power	1 Watt CW or 100 Watts Peak with a 0.005 Duty Cycle with any One RF Channel in the Insertion Loss State and 250 mW CW or 25 Watts Peak with Two Channels in the Insertion Loss State
Control	TTL Logic "0" (0 to +0.8 Volts)=On "1" (+2 Volts or Greater)=Off
Power Supply	+ 5V @ 105 mA Maximum (One RF Channel On) + 5V @ 70 mA Maximum (Two RF Channels On) -15V @ 60 mA Maximum (One RF Channel On) -15V @ 70 mA Maximum (Two RF Channels On)

Environmental Ratings:

Outline Drawing:

Click here to see the Outline Drawing for SWN-4TDR-HILL

Product Feature:

Click here to see the Product Feature for SWN-4TDR-HILL

Test Report:
Click here to see the Test Report for SWN-4TDR-HILL

First Article Approval:

Click here to see the First Article Approval for SWN-4TDR-HILL